Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
game gear capacitor Capacitor kit for Game Gear SegaFeatures: Capacitor repair kit for Sega Game Gear. Includes 20 Nichicon branded 105C through hole capacitors. Includes audio grade capacitors for recapping the audio board. Can resolve sound, main board & dim screen issues. Requires internal soldering. Description: This repair kit includes all of the capacitors needed to resolve most sound, power & dim screen issues on Sega Game Gear consoles. The 20 capacitor kit is compatible with the most common
Features:- Capacitor repair kit for Sega Game Gear.
- Includes 20 Nichicon branded 105°C through hole capacitors.
- Includes audio grade capacitors for recapping the audio board.
- Can resolve sound, main board & dim screen issues.
- Requires internal soldering.
Description:
This repair kit includes all of the capacitors needed to resolve most sound, power & dim screen issues on Sega Game Gear consoles.
The 20 capacitor kit is compatible with the most common models of Sega Game Gear including VA1, One Asic & Two Asic.
All capacitors are 105°C rated Nichicon brand through hole. Audio grade capacitors are provided for the recapping of the audio board, these produce superior sound quality compared to standard capacitors.
A reasonable level of soldering ability are required to install the replacement capacitors. The console must be opened to install.
Gamebit 4.5mm & Philips #00 screwdrivers are required to open the Sega Game Gear console (Not included).
Soldering iron, solder & desoldering braid required to fit capacitors, (not included).
This set includes:
- 2x 100uf - 6.3v
- 4x 10uf - 16v
- 2x 47uf - 6.3v (Blue capacitors - audio grade 47uf 6.3v)
- 2x 0.47uf - 50v
- 3x 100 uf - 6.3v (Blue capacitors - audio grade)
- 1x 68uf - 6.3v
- 1x 33uf - 6.3v
- 1x 22uf - 6.3v
- 1x 4.7uf - 35v
- 1x 22uf - 35v (Power board)
- 1x 100uf - 25v (Power board)
- 1x 820uf - 6.3v (Power board)
The voltage value of some capacitors may be higher than the original value in the console due to availability, the higher voltage values are fully compatible. Please ensure that the uf value matches as this does need to be the same as the one that is being replaced.
The blue capacitors included in this kit are of audio grade and should be fitted to the audio board.
Browse the range
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 611 reviews
Sort
Product Reviews
★★★★★ 5
Easy to install
Color: 4*2.5in Cube LED Pod
Definitely more than I expected. .. dang good product and easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab.
The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite.
To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place.
The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me.
No backlight on the switch, which is a necessity, and I dont understand why that feature is not present.
Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well.
5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 5
Bright lights
Color: 4*2.5in Cube LED Pod
Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
★★★★★ 5
Great product
Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
Great lighting and beautiful design!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
recommand products
Mountainsmith Bear Creek 4 Person Tent
23.98
AC Infinity CLOUDLAB 743D | 2-in-1 Advance Grow Tent
24.67
Quechua 2 Second Easy Fresh & Black Waterproof Pop Up Camping Tent 2 Person
26.64
LittleGiant SummitHaus Camper: Camping, Utility Trailer
22.27
Multi-Functional Breathable Cooling Elevated Dog Bed with Canopy - PawAir
22.36